Textile, Daily Chemical Washing, Oil Drilling, Food Fermentation, Water Treatment, Coating Ink, Papermaking
Availability: | |
---|---|
Quantity: | |
Characteristic
Different specific gravity of isolating agent can be formulated according to requirements, 1.0~1.9g/cm3
Non-toxic, odorless, non-corrosive.
Applicable temperature 25~240℃.
The prepared isolation solution has good compatibility with cement paste, which can effectively dilute and improve the performance of cement paste.
Technical specifications
Item | Indicators |
Initial consistency, Bc | ≤30 |
Thickening time, min/80℃.46.5Mpa.45min | ≥60 |
Density difference, g/cm3 | ≤0.05 |
Compressive strength, MPa/80℃. Normal pressure.24h | ≥7 |
Cement slurry formula in the table: G grade oil well cement + 5% prepared weighted isolation solution, water-cement ratio of 0.44, water quality is distilled water
After full hydration, add barite powder or other aggravating agents to adjust the specific gravity of the isolating solution to the specific gravity required by the cementing design. Before construction, a slurry test should be conducted to determine the compatibility of the isolating fluid with cement slurry and mud.
Packaging and Storage
Double bag or triple compound package with outer weave and inner plastic, 25kg/bag.
Prevent package breakage, exposure to sun and rain during storage and transportation. The storage period is two years.
Limited Warranty Information
This information has been prepared based on our current knowledge and experience, and we provide recommendations for application or use for your reference only. If you cannot confirm the safety of use, please contact your distributor or contact our company directly. Since the conditions and methods of using our products vary, we recommend that customers do a small trial test before use to ensure that the products are safe and effective for use. For product standards, please contact our company, but typical product data should not be used as product standards. We guarantee that our products will conform to the prevailing product standards and that we will be liable for refunds or replacement of products due to damage caused by non-conformity to product standards. Our company can provide chemical safety technical instructions upon request. This information is subject to revision without notice.
Characteristic
Different specific gravity of isolating agent can be formulated according to requirements, 1.0~1.9g/cm3
Non-toxic, odorless, non-corrosive.
Applicable temperature 25~240℃.
The prepared isolation solution has good compatibility with cement paste, which can effectively dilute and improve the performance of cement paste.
Technical specifications
Item | Indicators |
Initial consistency, Bc | ≤30 |
Thickening time, min/80℃.46.5Mpa.45min | ≥60 |
Density difference, g/cm3 | ≤0.05 |
Compressive strength, MPa/80℃. Normal pressure.24h | ≥7 |
Cement slurry formula in the table: G grade oil well cement + 5% prepared weighted isolation solution, water-cement ratio of 0.44, water quality is distilled water
After full hydration, add barite powder or other aggravating agents to adjust the specific gravity of the isolating solution to the specific gravity required by the cementing design. Before construction, a slurry test should be conducted to determine the compatibility of the isolating fluid with cement slurry and mud.
Packaging and Storage
Double bag or triple compound package with outer weave and inner plastic, 25kg/bag.
Prevent package breakage, exposure to sun and rain during storage and transportation. The storage period is two years.
Limited Warranty Information
This information has been prepared based on our current knowledge and experience, and we provide recommendations for application or use for your reference only. If you cannot confirm the safety of use, please contact your distributor or contact our company directly. Since the conditions and methods of using our products vary, we recommend that customers do a small trial test before use to ensure that the products are safe and effective for use. For product standards, please contact our company, but typical product data should not be used as product standards. We guarantee that our products will conform to the prevailing product standards and that we will be liable for refunds or replacement of products due to damage caused by non-conformity to product standards. Our company can provide chemical safety technical instructions upon request. This information is subject to revision without notice.