Textile, Daily Chemical Washing, Oil Drilling, Food Fermentation, Water Treatment, Coating Ink, Papermaking
Availability: | |
---|---|
Quantity: | |
Characteristic
It consists of various compounds such as gluconate and low molecular weight organic acids.
Non-toxic and non-corrosive.
Generally, the dosage is 0.5%~2.0% (of total solids), which is sensitive to temperature, and the dosage should be increased appropriately with the increase of temperature.
It can reduce the consistency of cement slurry and improve the rheology of cement slurry.
It can effectively extend the cement paste thickening time.
It is generally used in the temperature range of 110℃~210℃ (BHCT).
Technical specifications
Item | Indicators |
Thickening time (120℃/73.9 MPa/61min), min | ≥120 |
Initial consistency (120°C/73.9 MPa/61min), Bc | ≤30 |
Thickening linear mutation value, Bc | ≤10 |
Thickening time extension value, min | ≥60 |
Addition sensitivity, % | ≤25 |
Temperature Sensitivity, % | ≤20 |
Transition time (120℃/73.9 MPa/61min), min | ≤40 |
Free liquid (93 ℃), % | ≤1.4 |
Compressive strength (144°C/21 MPa/24 h), MPa | ≥14.0 |
Packaging and Storage
Solids are packed in double bags or triple composite bags, 25kg/bag; liquids are packed in plastic drums, 25kg/barrel.
The warehouse where the product is stored must be ventilated, dry and clean, and must not be mixed with harmful substances in storage and transportation, and must be protected from sun and rain, and must be covered during transportation.
Limited Warranty Information
This information has been prepared based on our current knowledge and experience, and we provide recommendations for application or use for your reference only. If you cannot confirm the safety of use, please contact your distributor or contact our company directly. Since the conditions and methods of using our products vary, we recommend that customers do a small trial test before use to ensure that the products are safe and effective for use. For product standards, please contact our company, but typical product data should not be used as product standards. We guarantee that our products will conform to the prevailing product standards and that we will be liable for refunds or replacement of products due to damage caused by non-conformity to product standards. Our company can provide chemical safety technical instructions upon request. This information is subject to revision without notice.
Characteristic
It consists of various compounds such as gluconate and low molecular weight organic acids.
Non-toxic and non-corrosive.
Generally, the dosage is 0.5%~2.0% (of total solids), which is sensitive to temperature, and the dosage should be increased appropriately with the increase of temperature.
It can reduce the consistency of cement slurry and improve the rheology of cement slurry.
It can effectively extend the cement paste thickening time.
It is generally used in the temperature range of 110℃~210℃ (BHCT).
Technical specifications
Item | Indicators |
Thickening time (120℃/73.9 MPa/61min), min | ≥120 |
Initial consistency (120°C/73.9 MPa/61min), Bc | ≤30 |
Thickening linear mutation value, Bc | ≤10 |
Thickening time extension value, min | ≥60 |
Addition sensitivity, % | ≤25 |
Temperature Sensitivity, % | ≤20 |
Transition time (120℃/73.9 MPa/61min), min | ≤40 |
Free liquid (93 ℃), % | ≤1.4 |
Compressive strength (144°C/21 MPa/24 h), MPa | ≥14.0 |
Packaging and Storage
Solids are packed in double bags or triple composite bags, 25kg/bag; liquids are packed in plastic drums, 25kg/barrel.
The warehouse where the product is stored must be ventilated, dry and clean, and must not be mixed with harmful substances in storage and transportation, and must be protected from sun and rain, and must be covered during transportation.
Limited Warranty Information
This information has been prepared based on our current knowledge and experience, and we provide recommendations for application or use for your reference only. If you cannot confirm the safety of use, please contact your distributor or contact our company directly. Since the conditions and methods of using our products vary, we recommend that customers do a small trial test before use to ensure that the products are safe and effective for use. For product standards, please contact our company, but typical product data should not be used as product standards. We guarantee that our products will conform to the prevailing product standards and that we will be liable for refunds or replacement of products due to damage caused by non-conformity to product standards. Our company can provide chemical safety technical instructions upon request. This information is subject to revision without notice.